If your old patio screen door is available, simply measure the length and width (outside edge-to-edge) and give us those measurements.
If your sliding screen doors are missing, determine WIDTH by measuring from inside of side jamb to center of stile on opposite side, just short of where the stationary glass begins. For the HEIGHT, measure from the top of the bottom track into the top U-Channel (see the diagrams below). Check your height measurements in 3 places (both ends and the center) and use the smallest of the 3 measurements. Please verify all measurements before submitting.
If your old sliding patio screen door is available, simply measure the length and width and give us those measurements.
This measuring guide is intended to assist you with a good fit of your sliding screen door, but all final measurements will be your responsibility. We are unable to accept returns or issue refunds on custom cut doors. Measure twice!
TIP: If your patio screen door is missing and you live in a subdivision, there's a good chance that one of your neighbors has one the same size as yours. Simply borrow that door and try it in your door opening. If it works, then just use those measurements to order your new patio screen door (make sure that you return the door to your neighbor!).
Once you have your sliding screen door measurement just click the link below so we can help you with your door purchase. sliding screen doors
Measurements of actual door, (if possible): _____ x ______
Width (Jam to style end) dimension: ___________
Height (For type "T" header):
Clear opening dimension "A" ___________ (to nearest 1/8").
Height (For type "U" header):
Clear opening dimension "B" ___________ (to nearest 1/8")